All the rooms in the building are captured in the room book and typical rooms allocated as per  step 2 , and luminaire types allocated as described in  step 3 .

Any desired designation can be selected for the  Name  (name),  Raumnummer  (room number) and  Stockwerk  (storey).

For each room, the spezifische  Leistung  (specific power) and the  Projekt-  (project) and

Anforderungswertwert  (specified value) – as per the selection in  step 1 : SIA -Limit Value,  SIA -Target Value, MINERGIE® or Effeled – in kWh/m² are calculated automatically.

The red or green dot in the first column shows whether the requirement is met for the room or not.

In our case, there is a need for optimisation in  Raum 1  (room 1) and  Raum 4  (room 4).

Go back to step 2 Typische Räume (Form 2, Typical rooms).

Using a contemporary lighting control system, the absolute electricity consumption of the lighting installation can be aligned to the conditions of use and the daylight conditions. 

Select:

1. Tageslichtregelung: Konstantlicht (Daylight control system: constant light)
2. Präsenzmelder: auto off (Presence detector: auto off)

Back in the room book, it is clear that the  Minergie Anforderungswertwert  (requirement value) is not exceeded in any of the rooms.